How to Fix A HVAC system in a fraction of the time

Your home or business is almost certain to have an HVAC system at some point. While not all systems are created equal, most homes and businesses have basic needs for removing heat and humidifying the air. In other words: heat and ventilation are essential for human comfort; a functioning HVAC system is a basic necessity. But even with this being the case, most homeowners and business owners don’t understand how quickly (and efficiently) their existing HVAC system can be repaired or replaced. This can be tough when you’re trying to save money or time as opposed to buying a new system from page one. But fear not! We’ve got some great tips on how to fix your own system in no time flat, saving you time and money in the long-run.

 Check for Ice and Freezing Risks first

One of the most common issues with a poor or malfunctioning air conditioner is the accumulation of frost on the outside of the equipment. If this occurs, you’re losing valuable time trying to free up the air in the system by removing the frozen items. In these cases, your best bet is to check the outside of the equipment first. The blower motor should be spinning as much as possible while the unit is set to “run” so that air can get into the system. If you notice that the motor is turning less or not at all, this is a sign that the blower motor is frozen. If this is the case, it’s best to replace the entire unit rather than trying to fix the problem with a cheap, after-market version. You should also check the condenser temperature gauge. If it’s consistently below 20 degrees Celsius, there’s a good chance that the condenser is also frozen. In these cases, you’ll want to remove the condenser and have it properly thawed before installing it again. Learn more about Heating and Cooling here.

 Don’t Replace a Damaged Valve

If you notice that your indoor or outdoor valve is leaking, it’s probably a good idea to have it replaced. A leaking valve is essentially a dangerous leak. What’s more, if you have a small leak and don’t notice it for a few days, the leak will have grown larger over time and may not be noticed for months. If your outdoor valve is leaking, the first thing you should do is check the surrounding area for water damage. If you spot leaking pipes or a water main, call your local plumbing department to have the problem assessed. If the leak is inside the house, you should check the indoor valves as well. If your outdoor valve is the source of the leak, the first thing you should do is call a plumber to have the leaking pipe capped. If possible, try to keep the pipe as cold as possible to stop the expansion of the water and prevent additional damage from happening.

 Have A Timing Chain Check

One of the biggest causes of HVAC system failure is faulty timing. In a poorly designed system, the climber may be operating beyond its capacity and generating heat at the same time that the air is being drawn in. This can be prevented by using a timing chain. The timing chain is a metal chain that runs the length of the air conditioner and holds two identical blowers together. The one that connects the compressor to the blower is known as the advance timing chain. The other is the reverse timing chain. It’s responsible for maintaining the blowers’ proportional speed to the amount of air being drawn in. To check the timing chain, remove the front cover and look at the timing chain directly below the compressor. If it looks fine, your unit is probably old and can be replaced for less than a new unit would cost. But if the chain looks worn or if the machine is actually running slightly faster because of the chain, use a timing chain tool to remove the offending link from the machine. Then, have the chain properly thawed before installing it again.

 Use The Right Tools For The Job

The most important tool for fixing any kind of problem is the right tool for the job. In this case, it applies especially true for HVAC systems. While most people are familiar with tools specifically designed to eliminate ice and water from air conditioners, they’re also very useful when it comes to fixing their own HVAC system. You should always use the right tools for the job. If you’re not familiar with removing a water-logged air conditioner from a home or commercial property, we highly recommend hiring a professional to do this for you. They’ll know what tools are required to remove a system and have the right tools for the job.

 Keep an Eye Out For Issues

Another important tip is to keep an eye out for problems. This includes not just mechanical issues but also visual inspection. Make sure that your filters are clean and that your indoor lights are working properly. You should also make sure that your HVAC system is venting properly and that the outdoor intake is seated securely against the building. If you notice any issues with your system, have it checked out ASAP. You may be able to fix the problem on the spot with a quick call to your local service provider. If not, have your system tested on the spot by a qualified HVAC technician.


Your air conditioner is a crucial piece of equipment that helps keep you and your home comfortable. Unfortunately, not all systems are created equal, and it’s important to know how to identify and repair problems with yours. These tips will help you do just that. The most important thing you can do is replace your broken or old unit with a new one. If you have to give up some of your comfort features like no air conditioner in the summer, you’re definitely missing out on a lot.






Leave a Reply